NEWS

***RS11 News***


RS11v4 3.45 Firmware Upgrade

A software update package version 3.45 is available for the RS11 v4 units. This upgrade adds soft alarm assignments and entering engine hour resets values up to a 5 digit number. Other updates include ppr entry up to 300 ppr,better resolution for low ppr values, added Trim Tab Field to Analog selections, and storing settings data on the RS11. more...

 

 

 





CONTACT US

NoLand Engineering
728 E. Lincoln Ave., No. 3
Melbourne, FL 32901 USA

info@nolandeng.com
Phone:(321) 951-7329
Fax: (321) 951-8773

Last modified: May 2014




RS11 CANbus Engine Data Converter



  • Overview
  • Specifications
  • Typical Installation
  • Documentation
  • Drivers & Utilities
  • Tips & Tricks

The RS11 Engine Data Converter converts tachometer signals and analog gauge voltages from virtually any engine into CANbus digital messages (NMEA 2000). It is configurable for either single or dual engine installations and includes a USB PC interface for initial configuration, data monitoring, and software updates. Output messages are applied to the CANbus for display by compatible devices.


The RS11 is designed for versatile interfacing to almost any type of analog engine sensor or gauge commonly used on marine or automotive engines. It has two pulse (RPM/Fuel Flow) inputs, six analog (gauge) inputs and supports both 12 and 24 volt systems. The analog inputs can be assigned all to one engine or be split between two engines. Multiple RS11's can be installed on the same CANbus. The RS11 can be used with existing analog gauges or as a replacement for them. Current sources within the RS11 will power resistive sending units where gauges have been removed or new senders(without gauges) have been added.


  • Supply Voltage/Current:     10-30 Vdc, 70 mA. max
  • RPM Accuracy:                      +/- 2 (ppr=200), +/- 4 (ppr=60), +/- 16 (ppr=12)
  • Tach Input Impedance:       > 100K ohm
  • Analog Input Impedance:   > 12K ohm
  • Analog Input Accuracy:       +/- 2%
  • Temperature:                       0 - 50 degC
  • Humidity:                               0 - 100% (non-condensing)
  • Certification:                         NMEA 2000 (Level A)
  • Size/weight:                           2.4" x 3.4" x 0.9" / 3 oz.
  • Warranty:                                2 year repair/replacement
  • N2K, PGNs:                          127245 - Rudder Angle
  •                                                 127448 - Engine Parameters, Rapid Update
  •                                                 127489 - Engine Parameters, Dynamic
  •                                                 127493 - Transmission Parameters, Dynamic
  •                                                 127505 - Fluid Level (Fuel, Oil, Water)
  •                                                 127508 - Battery Status (Volts, Amps)
  •                                                 130576 - Small Craft Status



  • Troubleshooting Tools (.pdf)   This tips & trick write up will show some of the troubleshooting tools available in the RS11 Setup Utility.